Dec01 - Compressor turned off
Nov14 - Replace slit drive motor.
Nov13 - Slit opener dead.
Nov09 - Filter wheel stepper motor coil left on. Problem traced to fault in stepper driver.
Nov06 - Rotate back plate back to normal. Modify secondary control software to minimize runaways.
Nov02 - Adjust Thirty inch primary helping collimation.
Oct25 - Temporary compressor installed.
Oct24 - Compressor in the shop.
Oct20 - Catastrophic failure 11:36 AM of compressor.
Oct19 - Pump and purge. Restart cooldown.
Oct18 - stop cooldown.
Oct17 - 10:50 stop cooldown. Pump out. Restart cooldown.
Oct12 - start cooldown
Oct11 - pump all day.
Oct10 - stop cooldown.
Oct06 - start cooldown.
Oct05 - Install Science chip in ircamera start pumping. Turn R filter on CCD camera upside down.
Oct04 - Remove home jumper from focus circuit.
Oct03 - Add capacitors to focus circuit.
Oct02 - Remove IR camera. Install R filter for Photometrics CCD.
Sep30 - Replace Photometrics shutter. Change qimage to nimage to work around strange bug.
Sep29 - Blast air over Photometrics shutter; it is working for now. IRCam cooler turned off. Telescope limits adjusted HA=+/- 2.5 Hours Dec=+65 -> -12 degrees.
Sep28 - Photometrics is now default CCD in tserver. UGAstro cluster enabled in tserver.
Sep27 - Flip mirror set screw tightened and angles changed. Photometrics CCD mounted.
Sep26 - Multiplexer mounted cooldown started.
Jan28 - Cooler returned rebuilt model 21 and absorber replaced.
